Esta página ha sido traducida usando Google Translate

Biblioteca de especificaciones de equipos

Información básica del modelo

  • Fabricante:
    Ditch Witch
  • Modelo:
    JT2020 Mach 1
  • Tamaño de la plataforma:
    10,001 - 20,000 lbs pullback

Ver fabricantes Ver modelos Volver al listado

Presupuesto

Pullback 20,000 lb 90 kN
Fuel Tank Capacity 30 GAL 113.562 40 liters
Max Pressure 1500 PSI 103 bar
Rated Engine RPM 2400 RPM
Make and Model Cummins B3.3
Thrust 17,000 lb 75.6kN
Manufacturer's Gross HP Rating 83 HP
Rod Carrying Capacity 400'
Weight LINED: 67 LB 30.39068879 kg
Length 120 IN 304.8 centimeters
Width 50.5 in 1.2827 meters
Weight 10,800 lb 4 898.7976 kilograms
Max Spindle Torque 2200 FT-LB
Number of Cylinders 4
Entry Angle 10 - 14 degrees
Min Bend Radius 130 FT
Pump Output Maximum flow rate 30 gpm
Ground Drive Speed FORWARD: 3.0 MPH
Height 78 in 1.9812 meters
Length 203 in 5.1562 meters
Max Flow 30 GPM
Min Bore Diameter 4 IN 10.16 centimeters
Displacement 199 cubic inches
Engine Engine: Cummins B3.3
Torque 2200 ft/lb, 150 rpm spindle speed 2983 Nm, 150 rpm spindle speed
Pipe Diameter 2.06 IN 5.2324 centimeters
Type POWER PIPE
Max Spindle Speed 150 RPM
Fuel Type Diesel
Joint Diameter 2.63 IN 6.6802 centimeters
Hydraulic Tank Capacity 17 GAL 64.3520003 liters

Información adicional

DIMENSION
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees

POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB

OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH

POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM

DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM

FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL

BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps

Ver fabricantes Ver modelos Volver al listado

Esta información se proporciona solo con fines informativos. HDD Broker, Inc. no puede garantizar la exactitud o integridad de esta información. Esta información está sujeta a cambios por parte del fabricante. Algunas especificaciones pueden variar según el año del modelo.

HDD Broker utiliza cookies y recopila información personal en sus sitios web.

Para obtener más información, consulte la Política de privacidad y la Política de cookies de HDD Broker. Al hacer clic en "Acepto", usted indica que ha ajustado la configuración de su navegador para que se ajuste a sus preferencias y acepta el uso de cookies por parte de HDD Broker.

x