Cerca

• Fabricante:
  Barbco
• Modelo:
  48/60-1.35MXHD

DIMENSIONS
Work Range: 12 to 48-54-60" (305 to 1219-1372–1524 mm)
Centerline: 33-3/4"–37-3/4"–41-3/4" (857.25–946.15–1060.45 mm)
Height: 66"–70"–74" (1674.4–1778–1879.6 mm)
Width: 72" (1828.8 mm)
Length: 156" (3962.4 mm)

WEIGHTS
Base Unit: 10,000 lbs (3719 kg)
Power Package - (Estimated): 8,100 lbs (3583 kg)
Casing Pusher 48": 1550 lbs (680 kg)
Casing Pusher 54": 1700 lbs (748 kg)
Casing Pusher 60": 1950 lbs (884 kg)
13' Master Track: 4600 lbs (2140 kg)
10' Extension Track: 3520 lbs (1623 kg)

ENGINE
Deutz BF6L914C Turbocharged – Charge Air Cooled – 6 Cylinder Air Cooled Diesel 185 HP (138 kw) @ 2300 RPM Continuous Duty Rating 516 ft/lbs (700 NM) Maximum Torque @ 1600 RPM

CLUTCH
13" (330 mm) Diameter

TRANSMISSION
Eaton Fuller FS-5205A - 5-Speed
1st Gear 7.52 : 1 Ratio
2nd Gear 4.35 : 1 Ratio
3rd Gear 2.54 : 1 Ratio
4th Gear 1.52 : 1 Ratio
5th Gear 1.00 : 1 Ratio
Reverse 6.27 : 1 Ratio

MAXIMUM OUTPUT TORQUES AND SPEEDS
1st Gear 155,213 ft/lbs (210,601 Nm) @ 8 RPM
2nd Gear 89,784 ft/lbs (121,824 Nm) @ 13 RPM
3rd Gear 52,426 ft/lbs (71,134 Nm) @ 22 RPM
4th Gear 31,373 ft/lbs (42,568 Nm) @ 38 RPM
5th Gear 20,640 ft/lbs (28,005 Nm) @ 58 RPM
Reverse 129,413 ft/lbs (175,594 Nm) @ 9 RPM

GEAR BOX
BBC #50 40 : 1 Ratio

AUGER DRIVE
5" (127 mm) Hex

PUMP
#25 Oil Gear 5000 PSI (Continuous) 5800 PSI (Intermittent) Pressure Compensated Load Sensing System, Axial Piston Pump 38 GPM @ 2300 RPM

CYLINDERS
(3) 10" Bore x 5.5" Rod x 36" Stroke Hydraulic Cylinders Maximum 1,350,000 lbs Thrust @ 5,800 PSI

FILTER
10 Micron Absolute Replaceable Element