Cerca

• Fabricante:
  Barbco
• Modelo:
  48/60-950

DIMENSIONS
Work Range: 12 to 48-54-60" (305 to 1219-1372-1524 mm)
Centerline: 28,33,37.5" (711-838-952 mm)
Height: 60-63-67" (1524-1600-1701 mm)
Width: 60" (1676 mm)
Length: 144" (3.66 m)

WEIGHTS
Base Unit: 6,425 lbs (2914 kg)
Power Pack: 6,400 lbs (2903 kg)
Casing Pusher 48": 1,185 lbs (538 kg)
Casing Pusher 54": 1,265 lbs (574 kg)
Casing Pusher 60": 2,000 lbs (907 kg)
Master Track: 2,530 lbs (1148 kg)
Extension Track: 1,875 lbs (850 kg)

ENGINE
Deutz Turbocharged BF6L914C Air Cooled 6 cylinder Direct Injected Diesel with Electric Start 160.5 HP @ 2500 RPM, 516 ft/lbs Peak Torque @ 1600 RPM

CLUTCH
13" (330 mm) Diameter

TRANSMISSION
Eaton Fuller FS-4205A - 5-Speed
1st Gear 8.05 : 1 Ratio
2nd Gear 4.35 : 1 Ratio
3rd Gear 2.45 : 1 Ratio
4th Gear 1.48 : 1 Ratio
5th Gear 1.00 : 1 Ratio
Reverse 8.05 : 1 Ratio

MAXIMUM OUTPUT TORQUES AND SPEEDS
1st Gear 225,136 ft/lbs @ 4 RPM
2nd Gear 121,657 ft/lbs @ 8 RPM
3rd Gear 68,520 ft/lbs @ 12 RPM
4th Gear 41,391 ft/lbs @ 20 RPM
5th Gear 27,967 ft/lbs @ 30 RPM
Reverse 225,136 ft/lbs @ 4 RPM

GEAR BOX
Fairfield #20 54.2 : 1 Ratio

AUGER DRIVE
5" (102 mm) Hex

PUMP
#25 Oil Gear 5000 PSI, (Continuous), 5800 PSI (Intermittent) Pressure Compensated Load Sensing System, Axial Piston Pump, 38 GPM @ 2300 RPM

CYLINDERS
(3) 9" Bore x 36" (914.4mm) Stroke, 1,106,000 lbs Max Thrust