Cerca

• Fabricante:
  Barbco
• Modelo:
  36/42-350

DIMENSIONS
Work Range: 12 to 36 - 42" (305 to 915 mm - 1066 mm)
Centerline: 36 Mode - 22.5" (572 mm), 42" Mode - 25.5" (647.7 mm)
Height: 36" Mode - 50"; 42" Mode - 53" (1270/1346 mm)
Width: 60" (1524 mm)
Length: 144" (3.66 m)

WEIGHTS
Base Unit: 4020 lbs (1823 kg)
Power Package Split Machine: 4750 lbs (2155 kg)
Casing Pusher 36" (914 mm): 750 lbs (340 kg)
Casing Pusher 42" (1066 mm): 875 lbs (397 kg)
Master Track: 2530 lbs (1148 kg)
Extension Track: 1875 lbs (850 kg)

ENGINE
Deutz F4L914 Diesel with Electric Start 80 HP @ 2500 RPM 196 ft/lbs (240 Nm) Peak Torque @ 1500 RPM

CLUTCH
13" (330 mm) Diameter

TRANSMISSION
Eaton Fuller FS-4205A - 5-Speed
1st Gear 8.05 : 1 Ratio
2nd Gear 4.35 : 1 Ratio
3rd Gear 2.45 : 1 Ratio
4th Gear 1.48 : 1 Ratio
5th Gear 1.00 : 1 Ratio
Reverse 8.05 : 1 Ratio

MAXIMUM OUTPUT TORQUES AND SPEEDS
1st Gear 71,000 ft/lbs (96,276 Nm) @ 4 RPM
2nd Gear 38,367 ft/lbs (52,025 Nm) @ 8 RPM
3rd Gear 21,609 ft/lbs (29,301 Nm) @ 14 RPM
4th Gear 13,054 ft/lbs (17,701 Nm) @ 23 RPM
5th Gear 8,820 ft/lbs (11,959 Nm) @ 33 RPM
Reverse 71,001 ft/lbs (96,277 Nm) @ 4 RPM

GEAR BOX
Fairfield #10 45 : 1 Ratio

AUGER DRIVE
4" (101.6 mm) Hex

PUMP
#15 Oil Gear 3500 PSI (Continuous), 4000 PSI (Intermittent) Pressure Compensated Load Sensing System, Axial Piston Pump 20.5 GPM @ 2300 RPM

CYLINDERS
(2) 8" (203.2 mm) Bore x 36" (914.4 mm) Stroke 351,862 lbs (1,565,082 N) Thrust (Continuous), 402,128 lbs (1,788,665 N) (Intermittent)

FILTERS
Suction: 100 Mesh Washable Stainless Steel Wire Cloth
Return: 10 Micron Replaceable Element