Cerca

• Fabricante:
  American Augers
• Modelo:
  MCM1000B

ELECTRICAL
Generator: 208 volt 3 phase - 27 kW prime power, 30 kW standby
Auxiliary electrical: 120/208 volt A.C. 6kva, 2 x duplex outlets with Ground Fault Interupter, 2 x 500 watt quartz work lights

ENGINE
Engine: Caterpillar diesel 4-cylinder naturally aspirated
Rating: 44.2 hp (32.9 kW) continuous duty
Fuel Capacity: 43 US gallons (163 L)

TANKS
Screen (dirty) tank: 350 US gallons (1325 L)
Clean fluid: 700 US gallons (2650 L) mixing tank with cleanout covers. Epoxy coated interiors.

SCREEN
Dual screen linear motion shaker, 28 x 46.5 inch (711 x 1181 mm), driven by electric motor, fold-down discharge chute for cuttings. Various screen mesh sizes available.

FLUID HANDLING SYSTEM
Rated capacity: Up to 160 gpm (605 L/min)
Circulating Pump: Centrifugal, electric driven, 3x4 15 hp (11.2 kW)
Desilting: Five inch cones (2 units) with manifolds and valves, fed by 2x3x7.5 HP (5.6 kW) centrifugal cone supply
Mud agitation: Three jets
Bentonite mixer: Dry bentonite mix hopper and mixing system shears bentonite four times for maximum yield. Coated butterfly valve reduces clogging.

PROTECTIVE EQUIPMENT
Work lights are standard. Electric motors are equipped with motor starters with overload relays. Machine has an emergency shut down switch. Supplied with electric grounding stake and cable. Safety railings around elevated work surfaces.

OPTIONS
Trash pump: Electric driven with circuit protection, with 100 feet (30.5m) of 4-inch discharge hose with cam-lock fittings.
Wash down system: 110 gallon (415 L) poly tank, 1500 psi electric driven pressure pump, 100' (30.5 m) hose, hose reel.

NOTES
The rule of thumb is that a cleaning system should have 1.5 to 2 times the capacity of the mud pump on the job. The MCM-1000B has a rated cleaning capacity of 160 gpm. It is suitable for use with drills whose mud pump output is 80 to 100 gallons per minute.