Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D23x30 S3
  • Rig Size:
    20,001 - 30,000 lbs pullback

View Manufacturers View Models

Specifications

Length 17.4' 5.3 m
Fuel Type Ultra low sulfur diesel
Hydraulic Tank Capacity 30 gal 113.6 L
Fuel Tank Capacity 35 gal 132.3 L
Ground Drive Speed 3.3 mph 5.3 km/h
Min Bend Radius 101.9' 31.3 m
Max Pressure 1300 psi 89.6 bar
Thrust 24,000 lb 106.8 kN
Manufacturer's Gross HP Rating 100 hp 75 kW
Weight 14,080 lb 6386.6 kg
Weight 62 lb 28.1 kg
Max Spindle Speed 219 rpm 219 rpm
Pipe Diameter 2.06" 5.2 cm
Rod Carrying Capacity 480' 146.3 m
Type Firestick drill rod
Engine Cooling System Liquid Liquid
Pullback 24,000 lb 106.8 kN
Make and Model Deutz TCD3.6L4
Entry Angle 12-18° (21.3-32.5%)
Max Spindle Torque 2.06" drill rod: 2600 ft-lb 5.2 cm drill rod: 3525.1 Nm
Displacement 220 cu in 3.6 L
Max Flow 35 gpm 132.3 L/min
Emissions Compliance Tier 4 Final (EU Stage IV) Tier 4 Final (EU Stage IV)
Rated Engine RPM 2000 rpm 2000 rpm
Min Bore Diameter 4" 10.2 cm
Max Carriage Speed 206 ft/min 62.8 m/min
Length 10' 3 m
Height 75" 190.5 cm
Width 52.5" 133.4 cm

Additional Info

GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 17.4' (5.3 m)
Min transport width: 52.5" (133.4 cm)
Min transport height: 75" (190.5 cm)
Weight: 14,080 lb (6386.6 kg)

ENGINE OPTION ONE
Make and model: Deutz TCD3.6L4
Fuel type: Ultra low sulfur diesel
Max engine rpm: 2000 rpm
Gross horsepower: 100 hp (75 kW)
Displacement: 220 cu in (3.6 L)
Cooling method: Liquid
Aspiration: Turbo
EPA certification family: Tier 4 Final (EU Stage IV)

ENGINE OPTION TWO
Make and model: Deutz TCD3.6L4
Fuel type: Diesel <2000 ppm sulfur content
Max engine rpm: 2000 rpm
Gross horsepower: 100 hp (75 kW)
Displacement: 220 cu in (3.6 L)
Cooling method: Liquid
Aspiration: Turbo
EPA certification family: Tier 3 (EU Stage IIIB)

OPERATIONAL
Thrust/Pullback: 24,000 lb (106.8 kN)
Max carriage speed at max engine rpm: 206 ft/min (62.8 m/min)
Max spindle torque [low at max engine rpm - 2.06"(5.2 cm) drill
rod]: 2600 ft-lb (3525.1 Nm)
Max spindle torque [low at max engine rpm - 2.375"(6 cm) drill
rod]: 3000 ft-lb (4067.5 Nm)
Max spindle speed at max engine rpm: 219 rpm
Min bore diameter: 4" (10.2 cm)
Max ground drive speed at max engine rpm (fwd): 3.3 mph (5.3 km/h)
Noise level at operator’s ear: 78.7 dB(A)
Drill rack angle: 12-18° (21.3-32.5%)

FLUID CAPACITIES
Fuel tank: 35 gal (132.3 L)
Antifreeze tank capacity: 2.5 gal (9.45 L)
Onboard optional water tank: 25 gal (94.5 L)

DRILLING FLUID SYSTEM
Max flow: 35 gpm (132.3 L/min)
Max pressure: 1300 psi (89.6 bar)

FEATURES
Breakout system:Standard hydraulic vise
Drilling lights: Optional
Flow indicator: Standard
Stakedown system: Standard
Strike alert: Standard
Remote lockout: Standard

DRILL PIPE OPTION ONE
Type: Firestick drill rod
Length: 10' (3 m)
Rod diameter: 2.06" (5.2 cm)
Weight: 62 lb (28.1 kg)
Bend radius: 101.9' (31.3 m)
Onboard capacity: 480' (146.3 m)

DRILL PIPE OPTION TWO
Type: Firestick drill rod
Length: 10' (3 m)
Rod diameter: 2.375" (6 cm)
Weight: 73 lb (33.1 kg)
Bend radius: 108.2' (33 m)
Onboard capacity: 400' (121.9 m)

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x