Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    American Augers
  • Model:
    24/30-150

View Manufacturers View Models

Specifications

Length 11'4" 3.43 m
Height 4'7" 1.40 m
Width 3' 0.91 m
Pullback 150,000 lbs 68 Tonnes
Weight 5,800 lbs 2,631 kg
Thrust 150,000 lbs 68 Tonnes

Additional Info

DIMENSIONS
Length: 11'4" (3.43 m)
Width: 3' (0.91 m)
Height: 4'7" (1.40 m)
Master Track Length: 11' (3.4 m) with 1" (25 mm) back plate
Master Track Width: 4'6" (1.37 m)
Centerline: 18.12" (460 mm)
Extension Track Length: 10' (3 m)
Extension Track Width: 4'6" (1.37 m)

WEIGHT
Base Unit/Powerpack: 4,300 lbs (1,950 kg)
Master Pusher: 425 lbs (193 kg)
Master Track: 1,000 lbs (454 kg)
Lifting Sling: 75 lbs (34 kg)
Total Weight 5,800 lbs (2,631 kg)
Extension Track: 950 lbs (430 kg) each
Master Saddle: 90 lbs (41 kg)

POWER TRAIN
Engine: Deutz D2011LOI Interim Tier IV Diesel
Rating: 46 HP (34.3 kW)
Maximum Engine Speed: 2,800 RPM
Engine Torque -
89 ft-lbs (120.7 Nm) @ 2,800 RPM
101 ft-lbs (136.9 Nm) @ 1,700 RPM
Maximum Noise Rating: 100.5 dB(A)
Fuel Capacity: 10 U.S. Gallons (38 L)
Hydraulic Capacity: 14.5 U.S. Gallons (55 L)
Battery: (1) Deka 634MF 12 V, 690 CCA

TRANSMISSION
Type: T-18, 4-Speed, Constant Mesh
Transmission Ratios -
1st Gear - 6.32:1
2nd Gear - 3.09:1
3rd Gear - 1.69:1
4th Gear - 1.00:1
Reverse - 7.44:1
Clutch: Spring Applied with 10" (254 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator

GEARBOX
Ratio 47.6.1

TORQUE AND SPEED

Torque Requirements (2800 RPM)
1st 26,268 ft-lbs. (35,608 Nm) 9 RPM
2nd 12,843 ft-lbs.(17,406 Nm) 19 RPM
3rd 7,024 ft-lbs. (9,523 Nm) 35 RPM
4th 4,156 ft-lbs. (5,635 Nm) 60 RPM
Reverse 30,923 ft-lbs. (41,933 Nm) 6 RPM

Torque Requirements (1700 RPM)
1st 29,810 ft-lbs. (40,420 Nm) 6 RPM
2nd 14,575 ft-lbs.(19,756 Nm) 12 RPM
3rd 7,971 ft-lbs. (10,810 Nm) 22 RPM
4th 4,717 ft-lbs. (6,395 Nm) 36 RPM
Reverse 35,092 ft-lbs. (47,852 Nm) 5 RPM

HYDRAULIC SYSTEM
Maximum Thrust: 150,000 lbs. (68 Tonnes)
Hydraulic Pump: Tandem Gear
Maximum Pump Pressure: 4,000 psi (276 bar)
Maximum Pump Output: 23 U.S. Gallons (87 L)/minute
Hydraulic Thrust Cylinder: (3) 4" Bore x 36" Stroke (102 mm x 914 mm)
Hydraulic Suction Strainer Filter: Suction Strainer with 100 Mesh Screen
Hydraulic Return Filter: High Pressure Return Filter to 14 Micron ABS with Replaceable Element

MASTER PUSHER
Diameter: 24" (610 mm)
Working Range: 4 – 30" (102 – 762 mm) Casing Diameter
Hex Drive: 3" (76.2 mm)

SPOIL DOOR
With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated spoil door, which deflects thrown debris from the spoil chamber.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x